LORDERAN 80L Refrigerated Incubator Shaker, Benchtop, 4-60°C, 30-400 rpm Orbital Shaker for Cell Culture & Microbiology
- SKU
- 200B
- Availability
- In stock
- Questions
Incubation, refrigeration and orbital shaking in one benchtop chamber. The 200B holds 80 L anywhere from 4 °C to 60 °C to ±0.1 °C, while a single balanced shaft turns the platform from 30 to 400 rpm, quietly and without splashing.
The cooler pulls down to 15 °C below room temperature, so 4 °C is reached when the lab is at 19 °C or cooler.
How cold can it go?
To 4 °C when the lab is at 19 °C or cooler: the cooler pulls down to 15 °C below room temperature. It heats to 60 °C.
What fits on the plate?
A 420 × 400 mm shaking plate in an 80 L benchtop chamber; see Plan your plate for flask counts.
How fast does it shake?
30 to 400 rpm on a 25 mm orbit, ±1 rpm, with soft start so flasks do not slosh over.
Which power does it need?
110 V or 220 V. Choose the voltage in the configurator.
200B 80 L Refrigerated Incubator Shaker datasheet
Full specifications, capacity planning, motion and temperature performance, installation requirements and warranty in one document to share with your team.Download datasheetOne balanced shaft, one steady orbit
The platform rides on a single-shaft drive turned by a brushless motor. Soft start ramps up the speed so flasks never slosh over, and the drive needs no routine maintenance.
Every flask traces the same 25 mm circle
- Soft start brings the platform up to speed without splashing samples.
- Single-shaft drive mechanism for quiet operation on the bench.
- Maintenance-free brushless motor built for long service life.
- Shaking stops when the cover opens and resumes automatically after a power cut.
Speed and orbit set the mixing
How hard the platform pushes your flasks depends on speed and orbit: the peak acceleration grows with the square of the speed and in proportion to the orbit. At 400 rpm a 25 mm orbit reaches about 2.24 g.
Peak acceleration = (2π × rpm / 60)² × orbit radius, in multiples of g (9.81 m/s²). The drawing shows the orbits to scale.
Incubate or refrigerate in the same chamber
A 400 W heater and a 118 W CFC-free cooler work under microprocessor control, with an adjustable circulation fan spreading the air evenly around every flask.
Temperature range
From cold storage to warm incubation
Control accuracy
Set and actual values shown side by side on the LCD.
Uniformity
Adjustable circulation fan for even temperature across the plate.
Plan your plate
The 420 × 400 mm shaking plate takes flasks from 50 ml to 2000 ml. Each layout shows the maximum load for one flask size.
2000 ml× 4 maximum
1000 ml× 8 maximum
500 ml× 12 maximum
250 ml× 18 maximum
100 ml× 32 maximum
50 ml× 45 maximum
Layouts are illustrative and show the maximum number of flasks of one size.
Standard configuration
Supplied with every 200B.
Made to run unattended
Program a run, close the tempered-glass cover and walk away. The shaker keeps time, watches its own temperature and protects your samples if something changes.
Show all 15 features: Control · Protection · Everyday use
Control
- Microprocessor control of temperature and shaking speed
- Programs with repetition, steps and eight curves
- Timer from 0 to 999 h 59 min, or continuous running
- LCD shows set and actual values
- Adjustable circulation fan speed
Protection
- High and low temperature alarm
- Shaking stops automatically when the cover opens
- Run resumes automatically after power is restored
- Sealed digital panel keeps spilled liquid out
- Soft start prevents samples from splashing
Everyday use
- Compact benchtop design with low running noise
- Tempered glass window to check samples without opening
- Cover opens wide for easy loading and sample selection
- User-friendly LCD screen and operation panel
- Maintenance-free brushless motor
Specifications
Available in 110 V and 220 V versions.
| Temperature Range | 4°C*-60°C(*RT.-15°C) |
|---|---|
| Accuracy of Temperature | ±0.1°C |
| Temperature Uniformity | ±0.5°C |
| Coolant | CFC-Free (134A) |
| Cooler | 118W |
| Heater | 400W |
| Speed Range | 30~400rpm |
|---|---|
| Speed Accuracy | ±1rpm |
| Orbit | Dia. 25mm |
| Programming Function | Programming of repetition, steps and eight curves settings |
| Size of Shaking Plate | 420×400 mm |
| Maximum Capacity | 2000ml×4 or 1000ml×8 or 500ml×12 or 250ml×18 or 100ml×32 or 50ml×45 |
| Standard Configuration | 500ml×3, 250ml×4, 100ml×5, 50ml×5 |
| Size of Chamber | 460×500×350 mm |
|---|---|
| External Size | 780×690×600 mm |
| Net Weight | 100kg |
| Gross Weight | 132kg |
| Power | 580W |
*The lowest temperature is room temperature (RT) minus 15 °C, with 4 °C as the lowest set point.
Questions buyers ask
Warranty, returns, delivery and quotes.
What does the warranty cover?
A 3-year worldwide warranty from the date of purchase, covering core components and controls. We repair first; if a major defect can’t be repaired, we replace the unit or give a full refund. Seals, belts and other wear parts are excluded.
Can I return it?
Yes, within 30 days of delivery if unused and in original condition. For non-quality returns the buyer pays return shipping, a 3% restocking fee and the card processing fee. Defective or damaged items are covered in full.
How is it delivered, and when does it ship?
Freight, duties and taxes are paid to your loading dock; moving the shaker inside is not included. Your confirmed ship date is included in the order acknowledgement.
Can I get a formal quote for a purchase order?
Yes. Select your model and options, then click Get a quote for a PDF quotation with DDP shipping included.
Choose your voltage
The price and PDF quote update with your choices.












